Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/28974
Título : Diseño y fabricación de una matriz de embutido y corte para producir un casquillo bipolar de resistencias eléctricas industriales en la empresa Redanse S.A.
Autor : Carrillo Rosero, Carlos Mauricio
Ortiz Escobar, Mario Gabriel
Palabras clave : MATRIZ DE EMBUTIDO
CASQUILLO BIPOLAR
MATRICERÍA
EMBUTICIÓN
OPERACIONES DE CORTE
FUERZA DE EXTRACCIÓN
VELOCIDAD DE EMBUTICIÓN
TRATAMIENTO TÉRMICO
PUNZÓN DE EMBUTICIÓN
FUERZA DE CORTE
Fecha de publicación : 2018
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Resumen : The present technical project focuses on the design, construction and operation tests of two matrices, one for embossing and another for cutting-drilling, with the purpose of generating bipolar bushes. First the selection of the material was made according to the functionality and mechanical properties of the same to act directly with the development or template of a metal sheet, being the AISI SAE D3 steel the most suitable for the punches and matrix plates, also for the elements The ASTM A36 steel and the AISI SAE 4340 for bushings and columns were chosen. Once the material was selected, the constituent elements of the matrices were designed. Through the theoretical and analytical part, punches and plates were designed for drawing, cutting and drilling, considering parameters such as radius, clearance, number of operations, lubrication, speed of work and geometric shape, that guarantee a deep drawing avoiding the breaking of the strap and likewise a cutout of the surplus and perforation of two holes. Finally, it was mechanized by means of the wire EDM process and tests were carried out in a hydraulic press and a punch press, in order to obtain the bipolar bushing fulfilling the requirements of Redanse S.A.
Descripción : El presente proyecto técnico se enfoca en el diseño, construcción y pruebas de funcionamiento de dos matrices, una de embutición y otra de recorte-perforado, con el propósito de generar casquillos bipolares. Primero se realizó la selección del material de acuerdo a la funcionalidad y propiedades mecánicas del mismo para actuar directamente con el desarrollo o plantilla de una chapa metálica, siendo el acero AISI SAE D3 el más adecuado para los punzones y placas matrices, además para los elementos constitutivos se optó por el acero ASTM A36 y el AISI SAE 4340 para bujes y columnas. Una vez seleccionado el material se procedió a diseñar los elementos constitutivos de las matrices, mediante la parte teórica y analítica se diseñó punzones y placas matrices de embutición, recorte y perforado, teniendo en cuenta parámetros como el radio, juego, número de operaciones, lubricación, velocidad de trabajo y forma geométrica, que garanticen una embutición profunda evitando la rotura del fleje y así mismo un recorte del excedente y perforado de dos agujeros. Finalmente, se mecanizó por medio del proceso de electroerosión por hilo EDM y se realizó pruebas en una prensa hidráulica y una troqueladora, para obtener el casquillo bipolar cumpliendo los requeridos de la empresa Redanse S.A.
URI : http://repositorio.uta.edu.ec/jspui/handle/123456789/28974
Aparece en las colecciones: Ingeniería Mecánica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis I. M. 491 - Ortíz Escobar Mario Gabriel.pdfTESIS A TEXTO COMPLETO4,26 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.