Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: https://repositorio.uta.edu.ec/jspui/handle/123456789/29778
Titel: Análisis y diseño estructural de una “cubierta tipo” de bambú, para canchas de uso multiple mediante el uso de los programas Revit, Robot y Etabs.
Autoren: Cañizares Proaño, Byron Genaro
Vásquez Carrillo, Juan Eduardo
Stichwörter: BAMBÚ
DISEÑO ESTRUCTURAL
CANCHAS DE USO MÚLTIPLE
REVIT
ROBOT
ETABS
MÓDULO DE CORTE
MÓDULO DE ELASTICIDAD
Erscheinungsdatum: 2019
Herausgeber: Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil
Zusammenfassung: In order to comply with the research objective, it was necessary in the first instance to define the appropriate geometric configuration of the structure, modeling and analyzing different configurations in the ETABS program, until, the configuration of the cover structure meets the period of vibration, floor drifts of less than 2% and that the participation of the masses is greater than 90%. Defined the geometry and structural configuration of the roof, it was also modeled in the Robot Structure Analysis program in order to perform a comparative analysis between the results presented by each of the programs and verify if they are similar, that they comply with the aforementioned checks. and to determine the soliciting efforts in each of the bamboo structural elements. Once the compression, traction, requesting moment and shear stress efforts to which the bamboo elements were subjected, obtained from the ETABS and Robot programs, were determined, the final Guadua GaK sections of the structure were designed by the method of permissible efforts, based on the NEC_SE_GUADUA and NSR-10 Cap. G.12., Since, the specialized programs of structural analysis do not contain norms referring to the design of bamboo structures. To conclude with the research, the three-dimensional representation and modeling of the structure was carried out in the Revit specialized program.
Beschreibung: Para cumplir con el objetivo de la investigación, fue necesario en primera instancia, definir la configuración geométrica adecuada de la estructura, modelando y analizando diferentes configuraciones en el programa ETABS, hasta que, la configuración de la estructura de cubierta cumpla con los chequeos período de vibración, derivas de piso menores al 2% y que la participación de las masas sea mayor al 90%. Definida la geometría y configuración estructural de la cubierta, ésta fue modelada también en el programa Robot Structure Analysis con el fin de realizar un análisis comparativo entre resultados presentados por cada uno de los programas y verificar si estos son similares, que cumplan con los chequeos mencionados y para determinar los esfuerzos solicitantes en cada uno de los elementos estructurales de bambú. Una vez determinados los esfuerzos de compresión, tracción, momento solicitante y esfuerzo cortante a los que los elementos de bambú estaban sometidos, obtenidos de los programas ETABS y Robot, se procedió a diseñar las secciones definitivas de Guadua GaK de la estructura por el método de esfuerzos admisibles, basados en la normativa NEC_SE_GUADUA y NSR-10 Cap. G.12., ya que, los programas especializados de análisis estructural no contienen normas referentes al diseño de estructuras de bambú. Para concluir con la investigación se realizó la representación y modelación tridimensional de la estructura en el programa especializado Revit.
URI: http://repositorio.uta.edu.ec/jspui/handle/123456789/29778
Enthalten in den Sammlungen:Ingeniería Civil

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
Tesis I. C. 1320 - Vásquez Carrillo Juan Eduardo.pdfTESIS A TEXTO COMPLETO9,57 MBAdobe PDFÖffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.