Please use this identifier to cite or link to this item: https://repositorio.uta.edu.ec/jspui/handle/123456789/30172
Title: Estimación de pérdidas de caudal y coeficiente de rugosidad del tramo comprendido entre el óvalo 01 al 11 del canal de riego Ambato - Huachi - Pelileo, cantón Ambato, provincia de Tungurahua
Authors: Maldonado Narvaez, Lenin Rafael
Romero Córdova, Félix Sebastián
Keywords: PÉRDIDAS DE CAUDAL
COEFICIENTE DE RUGOSIDAD
MOLINETE
AUTOCAD CIVIL 3D
SOFTWARE HEC-RAS
EL GPS DIFERENCIAL
ESTACIÓN TOTAL
Issue Date: 2019
Publisher: Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract: The purpose of this project is to estimate the losses of the Flow and Coefficient of Roughness of the section between Oval 01 to 11 of the Ambato - Huachi - Pelileo Irrigation Canal, Cantón Ambato, Tungurahua Province. This experimental work began with the obtaining of the topography of the place of study, the determination of specific velocities and the flow that circulates through the channel under study, the realization of mathematical calculations to obtain the volumetric losses and the coefficient of roughness in the channel, finally the numerical modeling with the help of the HEC-RAS software. Topographic data were collected with the help of the Trimble M3 model total station. The specific speeds were determined with the help of the DMM-4000 model windlass, these were determined every 250 meters ensuring that said point is not located in any curvature of the channel, then with the help of several mathematical processes we determine the flow losses existing in the channel and the roughness coefficient raised in this. In addition, a numerical modeling was performed in the HeCRAS software to estimate its hydraulic behavior under different operating scenarios. The results obtained a volumetric loss value of 0.045 m3s higher than the minimum value referenced in the Uginchos method and an average value of 0.017 for the roughness coefficient equivalent to a concrete coating, according to Robert Manning.
Description: El presente proyecto tiene la finalidad de estimar las pérdidas de Caudal y Coeficiente de Rugosidad del tramo comprendido entre el Óvalo 01 al 11 del Canal de Riego Ambato - Huachi - Pelileo, Cantón Ambato, Provincia de Tungurahua. Este trabajo experimental inició con la obtención de la topografía del lugar de estudio, la determinación de velocidades puntuales y el caudal que circula a través del canal en estudio, la realización de cálculos matemáticos para la obtención de las pérdidas volumétricas y el coeficiente de rugosidad en el canal, finalmente la modelación numérica con ayuda del software HEC-RAS. Los datos topográficos se recolectaron con ayuda de la estación total modelo Trimble M3. Las velocidades puntuales se las determinó con ayuda del molinete modelo DMM-4000, estas fueron determinadas cada 250 metros procurando que dicho punto no esté ubicado en alguna curvatura del canal, posteriormente con ayuda de varios procesos matemáticos determinamos las pérdidas de caudal existentes en el canal y el coeficiente de rugosidad suscitado en este. Además, se realizó una modelación numérica en el software HeCRAS para estimar el comportamiento hidráulico de éste bajo diferentes escenarios de funcionamiento. Se obtuvo como resultados un valor de pérdida volumétrica de 0.045 m32 superior al valor mínimo referenciado en el método teorico de Uginchos y un valor promedio de 0.017 para el coeficiente de rugosidad equivalente a un recubrimiento de hormigón, según Robert Manning.
URI: http://repositorio.uta.edu.ec/jspui/handle/123456789/30172
Appears in Collections:Ingeniería Civil

Files in This Item:
File Description SizeFormat 
Tesis I. C. 1347 - Romero Córdova Félix Sebastián.pdfTESIS A TEXTO COMPLETO6,77 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.