Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/35850
Título : Diseño estructural del edificio de la empresa pública municipal de agua potable y alcantarillado del cantón San José De Chimbo (EP – MAPA - CCH)
Autor : Ramírez Cabrera, Wladimir José
Guevara Jiménez, Marco Tulio
Palabras clave : DISEÑO ESTRUCTURAL
ANÁLISIS LINEAL
DISEÑO SISMORRESISTENTE
HORMIGÓN ARMADO
SAN JOSÉ DE CHIMBO
Fecha de publicación : sep-2022
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Resumen : Since the public company EP-MAPA-CCH does not have its own facilities, the structural design of a building is proposed. In this technical project, the bibliographic, deductive and analytical research method was applied, as well as descriptive and applied research. Based on the technical analysis and architectural design provided by the institution, the design of a reinforced concrete structure was carried out, for which a Moment-resisting frame systems with sagging beams was selected and gravity loads, overloads, seismic loads for a structure of normal occupancy and pre-design of structural elements were determined; parameters that allowed modeling the structure in a structural analysis and design software where the behavior of the structure was observed by performing the linear dynamic analysis, and the structural elements of the structure and foundation were also designed. For the validation of the design, the seismic-resistant requirements and design considerations specified in the following standards were verified: NEC-SE-CG-15, NEC-SE-DS-15, NEC-SE-HM-15, AISC 360-10, AISC 341-10, ASCE-SEI 7-16 and ACI 318-19. Concluding that the structure will behave safely in the event of a seismic event.
Descripción : Debido a que la empresa pública EP-MAPA-CCH no cuenta con las instalaciones propias se propone el diseño estructural del edificio. En el presente Proyecto Técnico se aplicó el método de investigación bibliográfico, deductivo y analítico, así como también la investigación descriptiva y aplicada. En base al análisis técnico y diseño arquitectónico proporcionados por la institución se realizó el diseño de una estructura de hormigón armado, para lo cual se seleccionó un sistema de pórticos resistentes a momento con vigas descolgadas y se determinó cargas gravitacionales, sobrecargas, cargas sísmicas para una estructura de ocupación normal y prediseños de elementos estructurales; parámetros que permitieron modelar la estructura en un Software de análisis y diseño estructural donde se observó el comportamiento de la misma realizando el análisis dinámico lineal, además se diseñó los elementos estructurales de la estructura y cimentación. Para la validación del diseño realizado se verificaron los requerimientos de sismo resistencia presentados y consideraciones de diseño que se encuentran especificados en las normativas: NEC-SE-CG-15, NEC-SE-DS-15, NECSE-HM-15, AISC 360-10, AISC 341-10, ASCE-SEI 7-16 y ACI 318-19. Concluyendo que la estructura se comportará de manera segura ante un evento sísmico.
URI : https://repositorio.uta.edu.ec/jspui/handle/123456789/35850
Aparece en las colecciones: Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis I.C. 1595 - Guevara Jiménez Marco Tulio.pdfTESIS A TEXTO COMPLETO10,75 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.