Estabilización de suelos de bases de agregados de clase 3 y 4 con polvo cerámica como reemplazo parcial del cemento

Abstract

As the population grows, its construction waste does the same, an example of this is the waste from sanitary slabs which, when it presents faults or imperfections, are discarded and not used. Having pozzolanic properties such as Aluminum, Calcium and Silicon, it was thought to incorporate this material in the stabilization with cement bases of aggregates class 3 and 4, since a partial replacement of cement would reduce the impact in terms of construction and economy. Initially, we proceeded with the collection of samples of aggregates class 3 and 4 so that we could know about their mechanical properties before altering them either with cement or ceramic powder. Ceramic dust was obtained from the sanitary slab discarded from the FV industry (Franze Viegener), and then incorporated into the stabilization of these aggregates, where the percentage of cement was decreased and the percentage of ceramic dust was increased according to the regulations (MOP-001-F002). Finally, we obtained the mechanical properties of the samples altered mainly the CBR and proceeded with the design of the pavement structure and its budget based on already known studies of the “Asfaltado de la vía San Rafael, San Juan, Chan, E35, Parroquia Eloy Alfaro cantón Latacunga Provincia de Cotopaxi”. Where vehicle couting was used to find the equivalent axels.