Ingeniería Civil y Mecánica
Permanent URI for this communityhttp://repositorio.uta.edu.ec/handle/123456789/898
Browse
4 results
Search Results
Item Implementación del proceso de conservación de la estructura de la capa de rodadura de la vía Patate - Píllaro en el tramo km 7+600 al km 11+400 de la provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2019) Tixe Granja, Edison Geovanny; Bayas Altamirano, Myriam MarisolThe present experimental work consists of the implantation of the process of conservation of the structure of the rolling layer of the Patate-Píllaro track in the section km 7 + 600 to the km 11 + 400 of the province of Tungurahua. The objective of this experimental work is to propose a road conservation management system based on the physical characteristics of the road, to have a georeferenced survey, to know the vehicular mobility existing at the present date. With the planimetric survey of the road whose length is 3800 m, a traffic study was conducted for 7 continuous days from 7 a.m. until 19 p.m., for which the manual counting methodology was used, determining 1694 vehicle / day of the current TPD classifying it in a collector route according to the Ministry of Transport and Public Works. (MTOP) For the visual evaluation of the functional condition of the pavement, the methodology of the Pavement Condition Index (PCI) was applied. Its application consists of a simple and economical method, which evaluates the surface condition of the road classifying according to the type of road surface. failure severity and density. For the non-destructive structural evaluation of the pavement, the Benkelman beam was used, this method consists in the application of a load by means of a dump truck whose weight is 8.2 tons with a pair of tires inflated at a pressure of 70 to 80 Psi, with this test it came to conclude that the subgrade has a very good structural behavior, but not the base whose behavior is deficient, this is because the pavement structure is not adequate since its asphalt is on a pavement. Pits were made for the evaluation of the support capacity of the existing structure, these tests were carried out taking soil samples for each km of the section studied, The samples were then transferred to the laboratories of the Faculty of Civil Engineering and Mechanics of the Technical University of Ambato for their respective analyzes such as granulometry, Modified Proctor, California Support Relationship Test (CBR) and Atterberg limits. Once the soil studies were carried out, it was evident that the properties of the base layer, being the only existing layer in the analysis section, do not meet the4 specifications proposed by the MTOP, but not the subgrade that has a good structural behavior. Finalized the experimental work with the realization of the road plan where the typology of the road can be observed, being a collection way, the samples realized for the application of the methodology PCI points of test with the beam Benkelman and wells it is suggested to carry out slight repairs in the way since it is superficially functioning in an adequate way.Item Actualización catastral de bienes inmuebles municipales urbanos y rurales del Gobierno Autónomo Descentralizado de San Pedro de Pelileo, utilizando las herramientas del Sistema de Información Geográfica (QGIS) y Alfanumérica Cabildo(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2018) Aillón Carrasco, Alba de Lourdes; Acosta Lozada, Rodrigo IvánThe Gobierno Autónomo Descentralizado de San Pedro de Pelileo has properties of its property obtained through purchase, expropriation, donation, barter and auction, but requires the systematized organization of its real estate, for proper control and management of them. For this reason, an update of the assets has been carried out, reviewing in the first place the physical deeds of each lot requested to the Department of Legal Advice and Land Registry, to proceed to create an Inventory of Municipal Assets in digital file in Excel, where the cadastral code, previous owner, current owner, form of acquisition, date of writing, registration date, registration number, land area, construction area, land appraisal, construction appraisal and total appraisal of the property. Regarding the area of land and construction, it was found that the scripts included old planimetries, which have been updated through a planimetric survey in the field. The appraisals of the properties have been determined by updating the cadastral records found in the Integrated Municipal Management System ERP CABILDO, using the technical information collected, such as land areas, construction and its characteristics, and legal information obtained from the Scriptures. Subsequently, the graphs of the municipal lots were corrected in the Quantum GIS Graphic Program (Qgis) with the help of the elaborated planimetries, in order to later link the inventory of digital Real Estate with the graphic part and create a shapefile in which it is deployed. the technical, legal and economic information of each property. The shapefile created will allow to locate the properties quickly, for any requirement that the Gobierno Autónomo Descentralizado de San Pedro de Pelileo has and will improve the administration of the goods that were previously outdated.Item Replanteo y planimetría de un área de terreno perteneciente a la cooperativa de vivienda "Amanecer Popular" ubicado en el sector tropezón, parroquia Huachi Chico, Cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Vinculación de la Carrera de Ingeniería Civil, 2013-08) Pérez, Lorena; Navarro, Carlos; Morales, HumbertoLos estudiantes de la facultad de Ingeniería Civil realizamos el levantamiento de las 272 lotes de la Cooperativa Amanecer Popular, para lo cual actuamos para este proyecto 28 personas y para esto se conto con equipo topográfico, se hizo el levantamiento, y la división de los lotes de cada manzana de dicha cooperativa, una vez realizada la división a computadora, llevamos esos datos a replantearlos en el terreno con una estación geodésica y para esto la distribución que hicimos en el terreno está delimitado por estacas que fuimos clavando según la distribución que hicimos a computadora, y después de esto procedimos hacer e imprimir las planimetrías de cada lote y su revisión y firma de los tutores.Item Análisis catastral de los lotes municipales para mejorar procesos de compensaciones y remates del Gobierno Autónomo Descentralizado Municipalidad de Ambato(2013) Bravo Valle, Luis DavidSegún el Código Orgánico de Organización Territorial Autonomía y Descentralización (COOTAD), en su artículo 147 manifiesta que “El gobierno central a través del ministerio responsable dictará las políticas nacionales para garantizar el acceso universal a este derecho y mantendrá, en coordinación con los gobiernos autónomos descentralizados municipales, un catastro nacional integrado georeferenciado de hábitat y vivienda”. Es así también que para procesos de compensaciones, remates, y comodatos de los lotes del Gobierno Autónomo Descentralizado Municipalidad de Ambato, es necesario tener un catastro para identificar geográficamente con exactitud donde se encuentra un terreno específico, así mismo saber su área, si posee escrituras, y resoluciones sobre este inmueble municipal. Para hacer realidad el catastro de lotes municipales el primer paso es revisar los archivos antiguos del Departamento de Catastros del Gobierno Autónomo Descentralizado Municipalidad de Ambato. Al encontrar en los archivos antiguos planimetrías, escrituras y resoluciones del Concejo Cantonal, se elabora un inventario por medio de un software de hoja de cálculo que tendrá como información: Ficha No, Referencia, Otorgante, Ubicación, Área, Indicaciones y Clave Catastral. Posteriormente se hace la investigación en campo para elaborar las planimetrías que no existen en los archivos antiguos y también para constatar que estén bien concebidas las planimetrías encontradas al igual que tomar fotos del estado actual del inmueble. Una vez con la información necesaria, se ubica y dibuja cada terreno en el plano urbano de Ambato, mediante un Sistema de Información Geográfica. Por medio del mismo Sistema de Información Geográfica, vinculamos a cada terreno la información de fotografía, escrituras y resoluciones en archivos de extensión .jpg para visualizarlos inmediatamente. Al tener ya un catastro de los lotes municipales en un Sistema de Información Geográfica, se podrá administrar sistemáticamente y brindar la información requerida para mejorar procesos de compensaciones y remates de una manera eficaz y oportuna.