Análisis de la influencia de las pruebas tecnológicas sobre las propiedades mecánicas de compuestos de resina polimérica reforzado con fibras naturales del Ecuador bajo norma ASTM
No Thumbnail Available
Date
2019
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Mecánica Mención Diseño
Abstract
This document responds to an investigative work, against the lack of knowledge of the
degree of degradation of composites in the open air, for this purpose the study of the
influence of UV radiation and humidity, considered as technological tests, on the
mechanical properties of tensile and flexion in two types of composite materials, one
with a matrix of polyester resin and reinforcement of cabuya fiber and the other with
the same matrix of the previous one with banana fiber reinforcement, under ASTM
regulations. In order to determine the percentage of humidity and UV affectation in
the aforementioned composite materials, by comparing their properties and
determining which one offers better anti-degrading benefits to technological tests,
tensile and flexural tests were carried out in the pre and post phases exposure to them.
From the experimental treatment of the data obtained, conclusions are established that
determine that the composite with better characteristics to resist technological tests is
one that uses banana reinforcement. Subsequently, it was validated its use within the
automotive industry - body supported by the analysis of finite elements performed by
the specialized software intermediary, determining that its ideal application is for
internal cover for bus roofs.
Description
El presente documento responde a un trabajo investigativo, frente al desconocimiento
del grado de degradación de los composites en servicio a la intemperie, para ello se
realizó el estudio de la influencia de la radiación UV y humedad, consideradas como
pruebas tecnológicas, en las propiedades mecánicas de tracción y flexión en dos tipos
de materiales compuestos, uno con matriz de resina poliéster y refuerzo de fibra de
cabuya y el otro con la misma matriz del anterior con la variante en el refuerzo
utilizando fibra de plátano, bajo normativa ASTM. Para llegar a determinar el
porcentaje de afectación de la humedad y UV en los mencionados materiales
compuestos, mediante la comparación de sus propiedades y determinar cual ofrece
mejores bondades antidegradantes a las pruebas tecnológicas, se efectuaron los
ensayos de tracción y flexión en fase pre y post exposición a las mismas.
A partir del tratamiento experimental de los datos obtenidos se establecen conclusiones
que determinan que el composite con características mejores para resistir a las pruebas
tecnológicas es aquel que emplea refuerzo de plátano. Posteriormente se procedió a
validar su empleo dentro de la industria automotriz – carrocera sustentada por el
análisis de elementos finitos realizado por el intermedio de software especializado,
determinando que su aplicación idónea es para forro interno para techo de autobuses.
Keywords
PROPIEDADES MECÁNICAS, RESINA POLIMÉRICA, FIBRAS NATURALES, FIBRAS VEGETALES, ENSAYO DE MATERIALES, PRUEBA DE HUMEDAD, PROCESOS DE FABRICACIÓN, PRUEBAS TECNOLÓGICAS, FIBRA DE PLÁTANO, ELEMENTOS FINITOS, TECHO DE AUTOBUSES, FORRO INTERNO