Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/33245
Título : Correlación entre el CBR, DCP, las propiedades índices y mecánicas en los suelos de la parroquia Río Negro del cantón Baños de Agua Santa, provincia de Tungurahua
Autor : López Arboleda, Alex Gustavo
López Sánchez, José Luis
Palabras clave : DCP
CBR
PROPIEDADES ÍNDICE
PROPIEDADES MECÁNICAS
LÍMITES DE ATTERBERG
Fecha de publicación : ago-2021
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Resumen : The purpose of this experimental work aims to determine the correlation between the laboratory CBR and the index and mechanical properties of the soils of the Río Negro parish of the Baños de Agua Santa canton, Tungurahua province. To start with the technical part, the most representative roads of the parish were identified for taking soil samples, where pits were made removing the layer of vegetal soil. The field tests and the taking of samples of approximately 50 kg for each point were carried out for the different tests to be carried out in the laboratory, in which the AASHTO regulations were applied. According to the results obtained in the field and laboratory tests, the simple and multiple correlations were carried out, applying the regression analysis and the least squares method respectively. Acceptable correlations were selected, according to the determination coefficient that is greater than 50 percent. Finally, 30 correlations were found where the coefficient of determination varies between 52 percent and 92 percent, this means that the CBR of the correlations is close to the laboratory CBR, therefore, they can be used for the design of pavements. flexible.
Descripción : Este presente trabajo experimental tiene como objetivo determinar las correlaciones entre el CBR y las propiedades índices y mecánicas de los suelos de la parroquia de Río Negro del cantón Baños de Agua Santa, provincia de Tungurahua. Para iniciar con la parte técnica, se identificó las vías de la parroquia más representativas para la toma de muestras de suelo, donde se realizó calicatas retirando la capa de suelo vegetal. Se realizó los ensayos de campo y la toma de muestras de aproximadamente 50 kg por cada punto esto para los distintos ensayos a realizarse en el laboratorio, en el cual se aplicó la normativa AASHTO. De acuerdo a los resultados obtenidos en los ensayos de campo y laboratorio, se realizó las correlaciones simples y múltiples, aplicando el análisis de regresión y el método de mínimos cuadrados respectivamente. Se seleccionó las correlaciones aceptables, de acuerdo al coeficiente de determinación que sea mayor al 50 por ciento. Finalmente, se encontró 30 correlaciones donde el coeficiente de determinación varía entre el 52 por ciento y el 92 por ciento, esto significa que el CBR de las correlaciones se aproxima al CBR de laboratorio, por lo tanto, se pueden utilizar para el diseño de pavimentos flexibles.
URI : https://repositorio.uta.edu.ec/jspui/handle/123456789/33245
Aparece en las colecciones: Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis I. C. 1495 - López Sánchez José Luis.pdfTESIS A TEXTO COMPLETO6,46 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.