Por favor, use este identificador para citar o enlazar este ítem:
https://repositorio.uta.edu.ec/jspui/handle/123456789/40449
Título : | Evaluación del desgaste de las herramientas de corte y acabado superficial en el fresado del acero inoxidable AISI 304 y acero AISI 1018 utilizando lubricación híbrida (nanofluidos +CO2) |
Autor : | Núñez Núñez, Diego Fernando Llumitasig Tubón, Wilmer Alexander Ocaña Guzmán, Adriel Santiago |
Palabras clave : | LUBRICACIÓN HIBRIDA MQL NANOPARTÍCULAS NANOFLUIDOS ACABADO SUPERFICIAL DESGASTE DE FLANCO AISI 1018 AISI 304 |
Fecha de publicación : | ene-2024 |
Editorial : | Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica |
Resumen : | The present project focused on the analysis of the effect of the hybrid lubrication method and a Minimum Quantity Lubricant (MQL) system together with Titanium Dioxide and Alumina nanoparticles on the milling process of AISI 1018 and AISI 304 steels, cutting tool flank wear and surface finish, which will be carried out on a CNC milling machine. In this analysis hard metal inserts with PVD TiAlN coating were used, cutting speed is the variable parameter, the recommended and maximum values by the manufacturer were used to establish the experimental combinations, for the hybrid lubrication methods two types of nanoparticles were used, Titanium Dioxide and Alumina for AISI 1018 and AISI 304 steels respectively at a concentration of 0. 5 percent by weight; using a combination of liquid and gaseous CO2 together with the system of minimum amount of lubricant directed to the contact zone of the work material and cutting tool to minimize the friction and temperatures generated in the cutting process. For the evaluation of flank wear and roughness, standard instruments such as the scanning electron microscope, based on the ISO 8688-1 standard specialized in this type of evaluations, and a roughness meter for the measurement of surface quality Ra and Rz were used. After analysis of the results, the surface finish of the steels was improved and the service life of the cutting tools was increased. |
Descripción : | El presente proyecto se centró en el análisis del efecto del método de lubricación híbrida y un sistema de Mínima Cantidad de Lubricante (MQL) junto a nanopartículas de Dióxido de Titanio y Alúmina en el proceso de fresado de los aceros AISI 1018 y AISI 304, el desgaste del flanco de la herramienta de corte y acabado superficial, el mismo que se llevará a cabo en una fresadora CNC. En este análisis se utilizaron insertos de metal duro con recubrimiento de PVD TiAlN, la velocidad de corte es el parámetro variable, se utilizaron los valores recomendados y máximos por el fabricante para establecer las combinaciones experimentales, para los métodos de lubricación híbrida se utilizaron dos tipos de nanopartículas, Dióxido de Titanio y Alúmina para los aceros AISI 1018 y AISI 304 respectivamente a una concentración del 0.5 por ciento en peso; utilizando una combinación de CO2 líquido y gaseoso conjunto con el sistema de mínima cantidad de lubricante direccionada a la zona de contacto del material de trabajo y herramienta de corte para minimizar la fricción y temperaturas generadas en el proceso de corte. Para la evaluación del desgate de flanco y rugosidad se utilizaron instrumentos estándar como el microscopio electrónico de barrido, basándose en la norma ISO 8688-1 especializada en este tipo de evaluaciones y un rugosímetro para la medición de calidad superficial Ra y Rz. Tras el análisis de los resultados mejoró el acabado superficial de los aceros e incrementó de la vida útil de las herramientas de corte. |
URI : | https://repositorio.uta.edu.ec/jspui/handle/123456789/40449 |
Aparece en las colecciones: | Ingeniería Mecánica |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
Tesis I.M. 799 - Llumitasig Tubon Wilmer Alexander - Ocaña Guzmán Adriel Santiago.pdf | TESIS A TEXTO COMPLETO | 47,28 MB | Adobe PDF | Visualizar/Abrir |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.