Diseño estructural de una vivienda unifamiliar sostenible empleando materiales amigables con el medio ambiente en la parroquia Salasaca
No Thumbnail Available
Date
2023-02
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
In order to reduce environmental pollution generated by the production of traditional
materials used in construction, this paper aims to structurally design a single-family
home using environmentally friendly materials, specifically reinforced earth and
local materials.
A geotechnical study was carried out in the place where the construction design is
applied through the SPT test, obtaining soil samples that, when analyzed through the
corresponding tests such as: Liquid limit, plastic limit and granulometry, with which
the quality of the land was known. and type of soil. Based on the data obtained from
the tests carried out, the allowable bearing capacity of the soil was determined.
After the analysis of the norms indicated for the design: Norm E.080 Design and
construction with subsequent reinforced earth, the geometry of the single-family
home, the dimensions of the walls, openings, floor height, foundation and overfoundation will be modified.
The modeling of the single-family home was carried out using design software,
where it was verified that the home complies with the parameters specified in the
NEC-SE-DS 2015 Standard.
Finally, the structural plans of the house were prepared and its budget was calculated.
Description
Con el fin de disminuir la contaminación ambiental generada por la producción de
los materiales tradicionales empleados en la construcción, el presente trabajo tiene
como objetivo diseñar estructuralmente una vivienda unifamiliar empleando
materiales amigables con el medio ambiente específicamente de tierra reforzada y
materiales de la zona.
Se realizó un estudio geotécnico en el lugar donde aplica el diseño de construcción
mediante el ensayo SPT, obteniendo muestras de suelo que al ser analizadas
mediante los ensayos correspondientes como: Límite líquido, límite plástico y
granulometría, con lo que se conoció la calidad del terreno y tipo de suelo. En base a
los datos obtenidos con los ensayos realizados se procedió a determinar la capacidad
portante admisible del suelo.
Posteriormente después del análisis de las normas indicadas para el diseño: Norma
E.080 Diseño y construcción con tierra reforzada, se determinó la geometría de la
vivienda unifamiliar, las dimensiones de los muros, vanos, altura de piso, cimiento y
sobrecimiento.
El modelamiento de la vivienda unifamiliar se realizó utilizando un software de
diseño, donde se comprobó que la vivienda cumple con los parámetros especificados
en la Norma NEC-SE-DS 2015.
Finalmente se elaboró los planos estructurales de la vivienda y se calculó el
presupuesto de la misma.
Keywords
VIVIENDA UNIFAMILIAR, VIVIENDA SOSTENIBLE, ADOBE, TIERRA REFORZADA, SISMORRESISTENTE, DESEMPEÑO ESTRUCTURAL