Análisis comparativo entre los valores del límite líquido obtenidos por copa de casagrande y penetrómetro de cono para suelos finos del cantón Pastaza, provincia de Pastaza

dc.contributor.advisorPortilla Yandún, Favio Paúl
dc.contributor.authorPilatasig Murillo, Lisbeth Solange
dc.date.accessioned2021-03-24T22:03:32Z
dc.date.available2021-03-24T22:03:32Z
dc.date.issued2021-03
dc.descriptionEn este trabajo de investigación se utilizaron 30 muestras de suelos finos, extraídas de diferentes sectores de la ciudad del Puyo, con el objetivo de realizar un análisis comparativo entre los valores de límite líquido usando la Copa de Casagrande (ASTM D 4318-2010) y el Penetrómetro de cono (Norma Británica BS 1377- 2:1990). Este último equipo (no disponible en el laboratorio), fue manufacturado de acuerdo a las especificaciones de la norma mencionada. Además, se determinó los límites de Atterberg, índice de plasticidad, clasificación SUCS y AASHTO y gravedad específica de cada una de las muestras, para correlacionarlas entre sí. Una vez obtenidos los resultados de los ensayos se tabuló, analizó e interpretó los datos. Para verificar la hipótesis planteada se utilizaron métodos estadísticos para determinar el nivel de correlación de los valores de límite líquido obtenidos por ambos métodos. Teniendo así que la hipótesis se cumple al presentar un coeficiente de correlación bueno de 0.81. De esta manera, el uso del penetrómetro de cono fabricado se considera como u método factible y alternativo para obtener el límite líquido de suelos finos. La ecuación de correlación es LL cone = 1.13 LL cup - 2.10. Por otra parte, se determinó factores de conversión de 0.9179 y 0.9199 para aproximadamente calcular el LL cup conociendo el valor de LL cone.es_ES
dc.description.abstractIn this research work, 30 samples of fine soils were used, which were extracted from different sectors of the city of Puyo, in order to perform a comparative analysis among liquid limit values using the Casagrande cup method (ASTM D 4318-2010) and the Cone Penetrometer method (British standard BS 1377-2: 1990). The last equipment (not available in the laboratory) was manufactured according the specifications of the mentioned standard. In addition, Atterberg limits, plasticity index, SUCS and AASHTO classifications and specific gravity of each of the samples were determined, to correlate them each other. Once the results of the tests were obtained, the data was tabulated, analyzed and interpreted. In order to verify the hypothesis raised, statistical methods were used to determine the level of correlation of the liquid limit values obtained by both methods. Thus, the hypothesis is fulfilled by presenting a good correlation coefficient of 0.81. In this way, the use of the ‘manufactured’ cone penetrometer is considered as a feasible and alternative method for obtaining liquid limit of fine soils. The correlation equation is LL cone = 1.13 LL cup - 2.10. Besides, conversion factors of 0.9179 and 0.9199 were determined to approximately calculate LLcup knowing the value of LLcone.es_ES
dc.identifier.urihttps://repositorio.uta.edu.ec/handle/123456789/32377
dc.language.isospaes_ES
dc.publisherUniversidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civiles_ES
dc.rightsopenAccesses_ES
dc.subjectCOPA DE CASA GRANDEes_ES
dc.subjectPENETRÓMETRO DE CONOes_ES
dc.subjectSUELOS FINOSes_ES
dc.subjectLÍMITE LÍQUIDOes_ES
dc.subjectCORRELACIÓNes_ES
dc.titleAnálisis comparativo entre los valores del límite líquido obtenidos por copa de casagrande y penetrómetro de cono para suelos finos del cantón Pastaza, provincia de Pastazaes_ES
dc.typebachelorThesises_ES

Files

Original bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Tesis I. C. 1454 - Pilatasig Murillo Lisbeth Solange.pdf
Size:
10.79 MB
Format:
Adobe Portable Document Format
Description:
TESIS A TEXTO COMPLETO

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: