Diseño de las obras de captación, conducción, almacenamiento y distribución del sistema de riego tecnificado en el barrio Miraflores, parroquia Saquisilí, cantón Saquisilí, provincia de Cotopaxi
No Thumbnail Available
Date
2023-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
Agriculture is one of the main economic activities carried out in Miraflores, Saquisilí,
Saquisilí, Cotopaxi. But, despite this, Miraflores lacks an irrigation systems that
contributes to agricultural production. For these reasons, the execution of this technical
project is proposed, which consists of the design of the infrastructure for the collection,
conduction, storage, and distribution of the technical irrigation system of this
neighborhood.
To begin with, Miraflores’ biophysical and environmental data were collected.
Subsequently, a topographic survey was carried out applying photogrammetric
techniques using GNSS IMU-RTK receivers and drones. Then the design of the
sprinkler irrigation system was executed, which was divided into two stages:
agronomic design and hydraulic design. While the first one consists of determining the
irrigation water needs, the second one has the purpose of defining the dimensions and
operation of the elements that make up the system. Finally, the referential budget of
this technical project and an environmental management plan were established.
The Miraflores’ sprinkler irrigation system consists of a 150-meter-deep water
extraction well; a conduction pipe of 617.45 meters fed by a submersible electric pump
of 15.00 horsepower; a storage tank of 100.80 cubic meters of capacity; and a branched
distribution network of 5712.92 meters.
Description
Una de las principales actividades económicas que se ejecutan en el Barrio Miraflores,
del cantón Saquisilí, de la Provincia de Cotopaxi, es la agricultura. A pesar de esto,
este barrio carece de un sistema de riego, lo que imposibilita el cultivo continuo de sus
parcelas. Por esto se propone la ejecución del presente proyecto técnico, el cual
consiste en el diseño de las obras de captación, conducción, almacenamiento y
distribución del sistema de riego tecnificado de éste.
Para empezar, se recolectaron datos biofísicos y ambientales del barrio en cuestión.
Posteriormente, se efectuó un levantamiento topográfico aplicando técnicas
fotogramétricas mediante receptores GNSS IMU-RTK y dron. Luego se llevó a cabo
el diseño del sistema de riego por aspersión, el cual se divide en dos etapas:
agronómica e hidráulica. Mientras la primera consiste en determinar las necesidades
medias de agua y la programación del riego; la segunda se basa en la definición de las
dimensiones y el funcionamiento de los elementos que componen dicho sistema. Para
finalizar, se estableció el presupuesto referencial de este proyecto y el plan de manejo
ambiental.
El sistema de riego por aspersión del Barrio Miraflores consiste en un pozo de
extracción de agua de 150 m de profundidad; una línea de impulsión de acero de 50
mm de diámetro alimentada por una electrobomba sumergible de 15 HP; un tanque de
reserva de 100.80 m3 de capacidad; y una red de distribución ramificada de 5712.92
m de longitud total.
Keywords
SISTEMA DE RIEGO, RIEGO POR ASPERSIÓN, LEVANTAMIENTO TOPOGRÁFICO, DISEÑO AGRONÓMICO, DISEÑO HIDRÁULICO, PRESUPUESTO REFERENCIAL, MANEJO AMBIENTAL