Diseño y construcción de un elevador tipo grúa geriátrica para el traslado de personas con dependencia funcional dentro las instalaciones del centro de atención integral para el adulto mayor del cantón Patate
No Thumbnail Available
Date
2021-02
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
In the present work, the design and construction of a geriatric crane-type elevator was
carried out, in order to carry out the transfer of people with functional dependence on the
bed to their wheelchair or other resting place in a safe way for both the patient and the
patient. for the nursing staff who perform manipulation of the patient.
In the initial part, the information was collected to establish the edge conditions, once
established, the bending design of the beams was carried out and their maximum
deformation was calculated according to the Von Mises theory of failure, the same that is
within within acceptable ranges without generating interference between machine
components.
To complement the design of the structure, the simulation was carried out using Solid
Works software where the load and displacement restrictions were applied, resembling
the real working conditions, the results obtained were favorable both in displacement and
in the distribution of efforts in the elements of the geriatric crane.
Using the REBA method, it was possible to know the risk to which the nursing staff is
exposed when performing manual manipulation of patients; once the geriatric lift was
implemented, this value decreased and an acceptable risk was reached
Description
En el presente trabajo se realizó el diseño y construcción de un elevador tipo grúa
geriátrica, con la finalidad de realizar el traslado de personas con dependencia funcional
de la cama hacia su silla de ruedas u otro sitio de reposo de manera segura tanto para el
paciente como para el personal de enfermería que realiza la manipulación del paciente.
En la parte inicial se realizó el levantamiento de información para establecer las
condiciones de borde, una vez establecidas se procedió a realizar el diseño a flexión de las
vigas y calcular su deformación máxima según la teoría de falla de Von Mises, la misma
que está dentro de los rangos aceptables sin generar interferencias entre los componentes
de la máquina.
Para complementar el diseño de la estructura se realizó la simulación mediante el software
Solid Works donde se aplicó la carga y las restricciones de desplazamiento asemejándose
a las condiciones de trabajo reales, los resultados obtenidos fueron favorables tanto en
desplazamiento como en la distribución de esfuerzos en los elementos de la grúa
geriátrica.
Mediante método REBA se logró conocer el riesgo al que está expuesto el personal de
enfermería al realizar la manipulación manual de pacientes, una vez implementada la grúa
geriátrica este valor descendió y se alcanzó un riesgo aceptable.
Keywords
GRUA GERIÁTRICA, RIESGO ERGONÓMICO, DEFORMACIÓN ESTRUCTURAL, FLEXIÓN ESTRUCTURAL, ESFUERZO MECÁNICO, ELEVADOR, REBA, LEY DE HOOKE, DISEÑO MECÁNICO, GRÚAS