Análisis de las propiedades mecánicas de la madera de canelo proveniente de la ciudad del Puyo provincia de Pastaza y su factibilidad como material estructural de acuerdo con la norma Ecuatoriana de la Construcción 2015 (NEC 2015)

No Thumbnail Available

Date

2024-08

Journal Title

Journal ISSN

Volume Title

Publisher

Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil

Abstract

The objective of this experimental work is to provide information on the mechanical properties of canelo wood (perpendicular bending and traction parallel to the fiber) from the urban parish: Puyo, and the rural parishes: El Triunfo, Veracruz and Tarqui, province of Pastaza, and reveal the maximum stress, modulus of elasticity and resistance to parallel traction and perpendicular bending to the grain that this type of wood presents. The research was based on the ASTM D143-94 regulations for the preparation of the test pieces, in which 6 samples were made for each test and both physical and mechanical properties were determined. In the physical tests, the moisture content was determined in the green or freshly cut state and dry state, which complies with the parameters given by the NTE INEN 896 (2013) standard, while for the mechanical tests the elastic modulus and the admissible stresses in axial bending and parallel traction of each of the parish specimens, governed by the formulas established by the ASTM D198 standard. According to the results of the analyzes given of the 48 samples of canelo wood, it was established that this type of wood can be used as a structural material, since its calculated mechanical properties gave significant values, taking into consideration that the wood Coming from the Puyo urban parish, it had better resistance in parallel traction and perpendicular bending to the fiber.

Description

El presente trabajo experimental tiene como objetivo, proporcionar información sobre las propiedades mecánicas de la madera de canelo (flexión perpendicular y tracción paralela a la fibra) procedente de la parroquia urbana: Puyo, y las parroquias rurales: El triunfo, Veracruz y Tarqui provincia de Pastaza, y dar a conocer el esfuerzo máximo, módulo de elasticidad y la resistencia a tracción paralela y flexión perpendicular a la fibra que presenta este tipo de madera. La investigación se basó en las normativas ASTM D143-94 para la elaboración de las probetas, las cuales se elaboraron 6 muestras por cada ensayo y se determinó las propiedades tantos físicas como mecánicas. En los ensayos físicos se determinó el contenido de humedad en estado verde o recién cortada y estado seco, que cumple con los parámetros dados por la norma NTE INEN 896 (2013), mientras que para los ensayos mecánicos se calculó el módulo de elasticidad y los esfuerzos admisibles a flexión axial y a tracción paralela de cada una de las probetas de las parroquias, rigiéndonos en las fórmulas que la norma ASTM D198 establece. De acuerdo con los resultados de los análisis dados de las 48 muestras de madera de canelo, se estableció que este tipo de madera si se puede utilizar como material estructural, ya que en sus propiedades mecánicas calculadas dieron valores significativos, teniendo en consideración que la madera proveniente de la parroquia urbana Puyo tuvo mejor resistencia en tracción paralela y flexión perpendicular a la fibra.

Keywords

MADERA, CANELO, FLEXIÓN AXIAL, TRACCIÓN PARALELA, PROPIEDADES FÍSICAS, PROPIEDADES MECÁNICAS, RESISTENCIA

Citation

Endorsement

Review

Supplemented By

Referenced By