Análisis del módulo de elasticidad estático en base a la resistencia a compresión del hormigón fabricado con materiales de las minas: “Las Peñas” en el cantón Tulcán, provincia del Carchi y “Ramírez”, ubicada en el cantón Ibarra, provincia de Imbabura
No Thumbnail Available
Date
2021-08
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The present experimental work was elaborated according to what is stated in the different
regulations in force. As a main aspect, the experimental, static modulus of elasticity was
determined, the process of which is illustrated in ASTM C469 and theoretical, using the
equations proposed in ACI 318, for the concrete manufactured with aggregates from the
Ramírez and Las Peñas mines, for subsequent comparison. and analysis. To achieve this,
a process was passed that began with a visual inspection and sampling, in accordance
with what is specified in the NTE INEN 695 standard, later, the reduction to test size was
carried out as indicated by NTE INEN 2566; The tests of the aggregates were started with
the intention of knowing their properties and anticipating their behavior in structural
concrete, complying with the provisions of NTE INEN 872; Likewise, the real density of
the cement was determined based on what was stated in NTE INEN 156. Finally, the
design of mixtures was carried out, using the maximum density method, for compressive
strengths of 21 and 28 Mpa at 28 days of age.
Once the final dosages were obtained, cylindrical specimens were made, fulfilling the
process in accordance with NTE INEN 3124. While simultaneously taking concrete tests
in fresh conditions as well as sampling; according to NTE INEN 1763, slump
determination in accordance with NTE INEN 1578, and density, performance, air content,
following the provisions of NTE INEN 1579. The respective tests were also carried out
on the concrete in the hardened condition, obtaining its compressive strengths for the ages
of 7, 14, 21 and 28 days, according with what was specified in NTE INEN 1573.
Description
En el presente trabajo se elaboró de acuerdo a las siguientes normativas vigentes. Como
aspecto principal se determinó el módulo de elasticidad estático, experimental, cuyo
proceso se ilustra en ASTM-C469 y teórico, empleando las ecuaciones propuestas en
ACI-318, para el hormigón fabricado con los agregados de las minas Ramírez y Las Peñas
para su posterior comparación y análisis. Se inició con una inspección visual y toma de
muestras, de acuerdo con lo especificado en la norma NTE-INEN-695, se realizó la
reducción a tamaño de ensayo, norma NTE-INEN-2566; se iniciaron los ensayos de
caracterización de los agregados con la intención de conocer sus propiedades y prever su
comportamiento en el hormigón estructural, acatando lo dispuesto en NTE-INEN-872;
así también, se determinó la densidad real del cemento basándonos en lo expuesto en NTE
INEN-156. Finalmente se realizó el diseño de mezclas, utilizando el método de la
densidad máxima, para resistencias a la compresión de 21 y 28 Mpa a los 28 días de edad.
Una vez obtenidas las dosificaciones definitivas, se elaboraron probetas cilíndricas
estándar, cumpliendo el proceso de NTE-INEN-3124, y a la vez se realizaron los ensayos
del hormigón en estado fresco, así como: la toma de muestras según NTE-INEN-1763,
determinación del asentamiento de acuerdo con NTE-INEN-1578, densidad, rendimiento
y contenido de aire, siguiendo lo expuesto en NTE-INEN-1579; También se realizaron
los respectivos ensayos en el concreto endurecido, obteniendo su resistencia a la
compresión para las edades de 7, 14, 21 y 28 días, acorde con lo especificado en NTEINEN-1573.
Keywords
ELASTICIDAD ESTÁTICO, COMPRESIÓN DEL HORMIGÓN, RESISTENCIA A COMPRESIÓN, AGREGADOS FINOS, AGREGADOS GRUESOS