Estudio del efecto de los líquidos iónicos (BMIMBF4) y (BMIMPF6) como aditivos en el aceite vegetal para el sistema de mínima cantidad de lubricante (MQL) en la vida útil de las herramientas de corte de metal duro y acabado superficial en el proceso de torneado del acero inoxidable AISI 304 y acero AISI/SAE 4140
No Thumbnail Available
Date
2021-08
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
The experimentation was carried out using a conventional semi-automatic lathe and
focused mainly on the surface finish of the machined specimens and the life mainly
focused on the surface finish of the machined specimens and the life of the cutting tool.
cutting tool life.
In the experimentation, tungsten carbide inserts with a tip radius of 0.8 mm and
denomination, CNMG 120408 MF 2025, according to the SANDVIK COROMANT
catalog were used as cutting tool, where the variation of the cutting speed, given by the
insert manufacturer, was counted as a parameter and the recommended and maximum
values were selected.
The homogeneous mixture used in the MQL lubrication system had as components the
vegetable oil "Coolube 2210 EP" and the ionic liquids (BMIM)(BF4) and (BMIM)(PF6),
it was established to use 1 percent by weight of ionic liquids per quantity of base oil,
having a flow directed to the working area between the cutting tool and the surface of the
specimen, therefore, a comparison of turning using the aforementioned lubrication system
and dry machining was made. dry machining. For the evaluation of the surface finish, the
roughness Ra and Rz were measured on the surface of the machined specimen using an
"SJ-210" roughness meter. According to ANSI/ASME B94.55M standard and with the
help of a scanning electron microscope, the service life of the machined specimen was
evaluated. the service life of the cutting tool was evaluated by observing and measuring
the evolution of the wear of the flank of the of the insert flank wear as a function of
machining time.
Description
La experimentación se llevó a cabo mediante un torno convencional semiautomático y se
enfocó principalmente en el acabado superficial de las probetas mecanizadas y la vida útil
de la herramienta de corte.
En la experimentación se utilizó como herramienta de corte, insertos de carburo de
tungsteno con un radio de punta de 0,8 mm y denominación, CNMG 120408 MF 2025,
según el catálogo de la marca SANDVIK COROMANT en donde se contó como
parámetro la variación de la velocidad de corte, dada por el fabricante del inserto, y se
seleccionaron los valores: recomendado y máximo.
La mezcla homogénea que se utilizó en el sistema de lubricación MQL tuvo como
componentes el aceite vegetal “Coolube 2210 EP” y los líquidos iónicos (BMIM)(BF4) y
(BMIM)(PF6), se estableció utilizar el 1 por ciento en peso de líquidos iónicos por
cantidad de aceite base, teniendo un flujo direccionado a la zona de trabajo entre la
herramienta de corte y la superficie de la probeta, por consiguiente, se realizó una
comparación del torneado utilizando el sistema de lubricación ya mencionado y el
mecanizado en seco. Para la evaluación del acabado superficial se midió la rugosidad Ra
y Rz en la superficie de la probeta mecanizada mediante un rugosímetro “SJ-210”. Según
la norma ANSI/ASME B94.55M y con ayuda del microscopio electrónico de barrido se
evaluó la vida útil de la herramienta de corte al observar y medir la evolución del desgaste
del flanco del inserto en función del tiempo de mecanizado.
Keywords
LÍQUIDOS IÓNICOS, VIDA ÚTIL, ACABADO SUPERFICIAL, TORNO SEMIAUTOMÁTICO, ACERO AISI 304, ACERO AISI/SAE 4140