Estudio y caracterización hidráulica del óvalo 1 al óvalo 4 del canal de riego Ambato- Huachi-Pelileo, cantón Ambato, provincia de Tungurahua
No Thumbnail Available
Date
2023-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
Due to the fact that there were no records of conditions in which the mencioned ovals
are found, in the present experimental work the study and hydraulic characterization
of the irrigation canal in the section between oval 1 and oval 4 located in the sector og
Huachi La Libertad, based on the topographic survey of the canal.
The physical and hydraulic properties of the channel included in the abscissas 0+00
kilometers 2+600 kilometers were determined, the total station was used to determine
the topography and the DMM-4000PFT windlass to determine the speeds at different
heights of the hydraulic depth, depending on the gauging method, the topography
obtained was processed with the help of specialized software to determine contour
lines, longitudinal profile of the channel, among others, the velocities were processed
in spreadsheets to determine the flow in each cross section and with this, the speed
graphs were made in which the minimum and maximum ranges existing in the study
channel were presented.
The channel was modeled using the hydraulic simulation program for channels and
recreating its behavior in a numerical model for each point, in which the change of
values of manning coeffcients was made, in other words, characteristic of the point of
the channel were determined, study and analyzed the impact of the canal design today.
Description
Debido a que no se tenía registros delas condiciones en las que se encuentra los óvalos
en mención, en el presente trabajo experimental se propone el estudio y caracterización
hidráulica del canal de riego en el tramo comprendido entre el óvalo 1 y óvalo 4
ubicados en el sector de Huachi La Libertad, basándose en el levantamiento
topográfico del canal.
Se determinó las propiedades físicas e hidráulicas del canal comprendido en las
abscisas 0+00 kilómetros 2+600 kilómetros, se utilizó la estación total para determinar
la topografía y el molinete DMM-4000/PFT para determinar las velocidades a
diferentes alturas de la profundidad hidráulica según sea el método de aforo, la
topografía obtenida se procesó con la ayuda de un software especializado para
determinar curvas de nivel, perfil longitudinal del canal, entre otros, las velocidades
fueron procesadas en hojas de cálculo para determinar el caudal en cada sección
transversal y, con esto se realizó las gráficas de velocidades en las cuales nos
presentaban los rangos mínimos y máximos existentes en el canal de estudio.
Se modeló el canal haciendo uso del programa de simulación hidráulica para canales
y recrear su comportamiento en un modelo numérico por cada punto, en el que se
realizó el cambio de valores de coeficientes de manning, en otras palabras, se
determinó características propias del punto del estudio y se analizó el impacto del
diseño del canal en la actualidad.
Keywords
CANAL DE RIEGO, CARACTERIZACIÓN HIDRÁULICA, SIMULACIÓN HIDRÁULICA, MOLINETE DMM-4000/PPFT, MODELOS NUMÉRICOS