Diseño de un sistema experimental de pruebas en columna para el análisis de sustancias reactivas en condiciones dinámicas para el tratamiento de aguas residuales
No Thumbnail Available
Date
2021-03
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
For the accomplishment of this project, we identify the type of reactive material for
the media filter, considering the nominal and critical size of sand, as a starting point
to determining the design of the length and diameter of the column, obtaining the
minimum length of the thickness for the reactive material in the filter based on
preliminary studies, for the system to works at its maximum capacity; subsequently,
where all the necessary information for the column design was collected, the
corresponding necessary flow calculations were made based on the filtration rates,
recommended by several authors, and therefore we use the design parameters of a
rapid filter due to a greater efficiency obtained in pollutants removal and shorter
system operating time. In order to validate the design of the experimental column test
system, a filter medium maintenance system was incorporated when required, for
which a pumping and piping system was selected to guarantee its cleaning.
After the design stage, the column test system was modeled using SolidWorks
software due to the ease of generating accessories and materials necessary for
assembly and showing in detail the process that leads to the construction of the system.
Description
Para la ejecución de este proyecto se identificó el tipo de material reactivo para el
medio filtrante, considerando el tamaño nominal y crítico de la arena, como base para
la determinación del diseño de la longitud y diámetro de la columna, obteniendo la
longitud mínima que debe poseer el espesor del material reactivo en el filtro en base a
estudios preliminares, para el cual el sistema funciona en su máxima capacidad;
posteriormente se recopiló toda la información necesaria para el diseño de la columna,
donde realizaron los cálculos correspondientes de caudal necesario en base a las tasas
de filtración que varios autores recomiendan y se ha decidido utilizar los parámetros
de diseño de un filtro rápido debido a una mayor eficiencia obtenida en la remoción
de contaminantes y menor tiempo de funcionamiento del sistema. Para poder dar como
válido el diseño del sistema experimental de pruebas en columna se incorporó un
sistema de mantenimiento del medio filtrante cuando se requiera, para el cual se
seleccionó un sistema de bombeo y tuberías que garantice la limpieza del mismo.
Finalizada la etapa de diseño, se procedió al modelado del sistema de pruebas en
columna mediante el uso del software SolidWorks debido a la facilidad de generar
accesorios y materiales necesarios para el ensamblaje y mostrar a detalle el proceso
que conlleva a la construcción del sistema.
Keywords
SUSTANCIAS REACTIVAS, AGUAS RESIDUALES, MEDIO FILTRANTE, FILTRO RÁPIDO, COLUMNA FILTRANTE, TASA DE FILTRACIÓN