Modelación de tubos de calor tipo sifón mediante el uso de un software computacional para disipar calor en el procesador de una computadora de escritorio
No Thumbnail Available
Date
2021-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
His first studies of heat pipes began in 1944, his first applications were in satellites
with the aim of maintaining a uniform and distributed temperature throughout the
structure, then he focused more on the branch of electronics.
The investigations were carried out in heat pipes that are elements of great thermal
conductivity, their structure is completely closed, they state; of an evaporator, an
adiabatic section and a condenser section were used; various working fluids, distilled
water having a range of 30 to 200 degrees centigrade, ammonia -60 to 100 degrees
centigrade, sodium 600 to 1200 degrees centigrade, mercury 250 to 650 degrees
centigrade, methanol 10 to 104 degrees centigrade.
Round copper, aluminum and stainless-steel heat pipes were used that are designed
between 0.6 x 0.6 mm in their cross section and their length can vary between 25 and
100 mm according to their use, inside they are formed without a wick or with an
enveloping fine mesh wick, sintered powder metal, axial groove and among others.
The operation was applied to the evaporator that leads through the wick and the tube
that vaporizes the working fluid, the pressure of the vapor is driven towards the
condenser where the vapor is condensed, the capillary pressure created in the wick
pumps the condensed liquid towards behind this process is continuous as long as
there is capillary pressure.
Description
Sus primeros estudios de los tubos de calor se iniciaron por el año de 1944, sus
primeras aplicaciones fueron en los satélites con el objetivo de mantener una
temperatura uniforme y distribuida en toda la estructura, posteriormente se enfocaron
más en la rama de la electrónica.
Las investigaciones se las realizaron en tubos de calor que son elementos de gran
conductividad térmica, su estructura es completamente cerrada, constan; de un
evaporador, una sección adiabática y una sección de condensador se utilizaron;
varios fluidos de trabajo, agua destilada que tiene un rango de 30 a 200 grados
centígrados, el amoniaco -60 a 100 grados centígrados, el sodio 600 a 1200 grados
centígrados, mercurio 250 a 650 grados centígrados, metanol 10 a 104 grados
centígrados.
Se utilizaron tubos de calor redondos de cobre, aluminio y acero inoxidable que están
diseñados entre los 0,6 x 0,6 mm en su sección transversal y su longitud puede variar
entre 25 y 100 mm de acuerdo a su uso, en su interior están formados sin mecha o
con una mecha de malla fina envolvente, metal en polvo sinterizado, ranura axial y
entre otros.
El funcionamiento se aplicó al evaporador que conduce a través de la mecha y el
tubo que vaporiza el fluido de trabajo, la presión del vapor es impulsada hacia el
condensador donde el vapor se condensa, la presión capilar creada en la mecha
bombea el líquido condensado hacia atrás este proceso es continuo mientras exista la
presión capilar.
Keywords
FLUIDO DE TRABAJO, TUBOS DE CALOR, PRESIÓN CAPILAR, DISIPADOR DE CALOR, PRESIÓN DE VAPOR