Análisis mediante el método de elementos finitos del ensayo estático según la norma INEN 2708 de la estructura del asiento de transporte público interprovincial para verificar su conformidad en la empresa Sistemas de Asientos American
No Thumbnail Available
Date
2016
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica
Abstract
In the seating industry passenger bus in the country the process of construction of the
structure of the seats is done by hand because there are no studies on the strength of
the structure is reflected, and most producers already have their model defined and
shaped, that is where the implementation of the rules NTE INEN 2708 as it focuses
not comply with those rules.
In this study the mechanical properties of the materials were determined by uniaxial
tensile test of materials constituting the structure of the two seat models which are
manufactured in the company Seat System AMERICAN with the finite element
method the resistance was found of the whole seat structure applying loads at different
positions and heights as indicated by the standard INEN NTE 2708 in appendix 12.
After simulating the seat strength it was found that the seat resists all the time of
application of the load thus fulfilling the Ecuadorian NTE INEN 2708 standard.
Description
En la industria de asientos para bus de pasajeros del país se reflejó el proceso de
construcción de la estructura de los asientos que se realiza de forma artesanal ya que
no existe estudios sobre la resistencia de la estructura, y la mayoría de los productores
ya tienen su modelo definido y conformado, ahí es donde se enfoca la implementación
de la normativa NTE INEN 2708 ya que no se cumple con dicha normativa.
En este estudio se determinó las propiedades mecánicas de los materiales mediante
ensayo de tracción uniaxial de los materiales que constituyen la estructura de los dos
modelos de asientos que se fabrican en la empresa Sistema de Asientos AMERICAN,
con el método de elementos finitos se comprobó la resistencia de toda la estructura del
asiento aplicando cargas en distintas posiciones y alturas como indica la norma NTE
INEN 2708 en la sección 12.
Después de la simulación de resistencia del asiento se comprobó que si resiste durante
el tiempo de aplicación de la carga cumpliendo así con la norma NTE INEN 2708
ecuatoriana.
Keywords
ELEMENTOS FINITOS, ENSAYO ESTÁTICO, TRANSPORTE PÚBLICO, ENSAYO DE TRACCIÓN, ANÁLISIS DE ESFUERZOS, GESTIÓN DE CALIDAD, RESISTENCIA DE MATERIALES