Evaluación de la planta de tratamiento de aguas residuales de la parroquia rural Once de Noviembre, cantón Latacunga, provincia de Cotopaxi
No Thumbnail Available
Date
2023-02
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
In order to mitigate the problems of water contamination from a conventional sewage
system and that it is returned to the environment with its zero harmful load of
contaminants, with the purpose of determining if the treated water that is returned to a
source of fresh water complies with the provisions of the TULSMA 2015.
Information was collected from the sector where the WWTP is located; Using the
volumetric method, we proceeded to collect data on the flows of the tributary and
effluent; Taking the NTE INEN 2 176:1998 and NTE INEN 2 169:1998 standards as a
reference, residual water sampling was carried out at the entrance and exit of the
WWTP, to analyze its physical-chemical characteristics in the laboratory; then the
comparison was made with the discharge parameters established by the TULSMA 2015,
where it was verified that the total phosphorus, ammoniacal nitrogen, COD and BOD,
do not comply with the provisions of the current standard, for which we proceeded to
search a proposal to improve the aforementioned parameters.
Finally, a new treatment train was proposed, incorporating a Screening, Sand Trap,
Septic Tank, FAFA and dried sludge bed, so that the residual water treated in the
WWTP could theoretically remove 90 percent of the contaminants efficiently; In
addition, an operation and maintenance plan for the WWTP was proposed to guarantee
its useful life.
Description
Con el fin de mitigar los problemas de contaminación del agua provenientes de un
sistema de alcantarillado convencional y que ésta sea devuelta al medio ambiente con su
carga nociva nula de contaminantes, con el propósito de determinar si el agua tratada
que es devuelta a una fuente de agua dulce cumple con lo estipulado en el TULSMA
2015.
Se realizó el levantamiento de información del sector en donde se encuentra la PTAR;
utilizando el método volumétrico se procedió a realizar la recolección de datos de los
caudales del afluente y efluente; tomando de referencia la norma NTE INEN 2 176:1998
y NTE INEN 2 169:1998 se ejecutó el muestreo del agua residual en el ingreso y salida
de la PTAR, para ser analizadas sus características físico químicas en laboratorio; a
continuación se efectuó la comparación con los parámetros de descarga que establece el
TULSMA 2015, donde se verificó que el fósforo total, nitrógeno amoniacal, DQO y el
DBO, no cumplen con lo establecido en la norma vigente, por lo cual se procedió a
buscar una propuesta que permita mejorar los parámetros mencionados.
Finalmente se planteó un nuevo tren de tratamiento, incorporando un Cribado,
Desarenador, Tanque Séptico, FAFA y Lecho secado de lodos, para que el agua residual
tratada en la PTAR logre remover teóricamente el 90 por ciento de los contaminantes de
forma eficiente; adicional se propuso un plan de operación y mantenimiento de la PTAR
para garantizar su vida útil.
Keywords
FÓSFORO TOTAL, NITRÓGENO AMONIACAL, DEMANDA QUÍMICA, DEMANDA BIOQUÍMICA, FILTRO PERCOLADOR, AGUAS RESIDUALES, PARTÍCULAS SÓLIDAS, ÁREA DE CRIBAS