Diseño del sistema de agua potable para la comunidad de Maikiuants, cantón Limón Indanza, provincia de Morona Santiago
No Thumbnail Available
Date
2022-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
Due to the problem of malnutrition and poor health in the people of the Maikiuants
community, caused by the lack of basic water service. In this technical project, the
design of the drinking water system was carried out based on the results by INEN,
corresponding to the chapter on the Drinking Water Supply System.
With their methods of analysis and data collection, such as direct observation and
reconnaissance of the terrain, they allowed to determine the number of assistants
corresponding to 200 people; Through a topographic survey, the land was defined,
such as the total area of the project, place of treatment, layout of the conduction line
and distribution.
The physical-chemical and microbiological characteristics of the water were
determined with a laboratory analysis, resulting in it being suitable for human
consumption, which was made for a disinfection process to eliminate pathogenic
microorganisms through the use of chlorine.
With the conduction and distribution network was designed with pipes and accessories
made of PVC material, with the treatment based on the use of the Clorid L-30
equipment for chlorine, adding to this a slow sand filter to control dirty water. The
storage tank was designed in reinforced concrete with a capacity of 20 cubic meters.
Finally, the unit price analysis was carried out to determine the reference budget.
Description
Debido a la problemática de desnutrición y deterioro de la salud en los habitantes de
la comunidad Maikiuants, causada por la falta del servicio básico de agua. En este
proyecto técnico se realizó el diseño del sistema de agua potable basándose en los
parámetros establecidos por el INEN, correspondiente al capítulo de Sistema de
abastecimiento de agua potable.
Los métodos de análisis y recolección de datos, tales como la observación directa y
reconocimiento del terreno permitieron determinar el número de beneficiarios
correspondiente a 200 habitantes; a través de un levantamiento topográfico se
definieron las condiciones del terreno, tales como el área total del proyecto, lugar para
la planta de tratamiento, trazado de la línea de conducción y distribución.
Se determinó las características físico-químicas y microbiológicas del agua mediante
un análisis de laboratorio resultando apto para el consumo humano mismo que fue
sometido a un proceso de desinfección para eliminar microorganismos patógenos
mediante el uso del cloro.
Se diseñó la red de conducción y distribución con tuberías y accesorios de material
PVC, una planta de tratamiento la cual se basó en el uso del equipo Clorid L-30 para
la dosificación de cloro, sumando a esto un filtro lento de arena para controlar la
turbiedad del agua. El tanque de almacenamiento se diseñó en hormigón armado para
una capacidad de 20 metros cúbicos. Finalmente se realizó el análisis de precios
unitarios para determinar el presupuesto referencial.
Keywords
AGUA POTABLE, HORMIGÓN ARMADO, TUBERÍA PVC, FILTRO LENTO, PLANTA DE TRATAMIENTO