Comparación al desempeño del LIM-UTA, mediante la implementación de los requisitos técnicos que establece la norma NTE INEN-ISO/IEC 17043:2010 de interlaboratorio para la realización de ensayos de aptitud de inflamabilidad de acuerdo con la norma NTE INEN-ISO 3795
No Thumbnail Available
Date
2023-09
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
This project presents the collection of information to meet one of the requirements
requested by ISO/IEC 17025:2017 with the performance of interlaboratory proficiency
testing based on the standard NTE INEN/IEC 17043:2010 establishing the parameters
of the standard NTE INEN-ISO 3795.
In the present project, comparisons were made of the performance of the Mechanical
Research Laboratory of the Technical University of Ambato (LIM-UTA) in the
performance of flammability proficiency tests, following the technical requirements
established by the interlaboratory standard NTE INEN-ISO/IEC 17043:2010. The
main objective is the accreditation and evaluation of the competence and reliability of
the laboratory in the execution of the tests according to the parameters established by
NTE INEN-ISO 3795. The comparison of LIM-UTA's performance was carried out
following the guidelines established in the standards used. Representative samples of
flammable textile materials were selected according to NTE INEN-ISO 3795 for
evaluation. These samples were distributed to different participating laboratories,
including LIM-UTA, in order to carry out the flammability suitability tests.
At the end of the study, a report will be submitted analyzing the deviations,
discrepancies and various parameters such as accuracy and the laboratory's ability to
meet the limits of the acceptability criteria required by the NTE INEN-ISO/IEC
17043:2010 standard for the proficiency testing program.
Description
En este proyecto se presenta el levantamiento de la información para cumplir uno de
los requerimientos que pide la norma ISO/IEC 17025:2017 con la realización de
ensayos aptitud de interlaboratorio basado con la norma NTE INEN/IEC 17043:2010
estableciendo los parámetros de la norma NTE INEN-ISO 3795.
En el presente proyecto se efectuaron las comparaciones del desempeño del
Laboratorio de Investigación Mecánica de la Universidad Técnica de Ambato (LIMUTA) en la realización de ensayos de aptitud de inflamabilidad, siguiendo los
requisitos técnicos establecidos por la norma NTE INEN-ISO/IEC 17043:2010 de
interlaboratorio. El objetivo principal es la acreditación y la evaluación de la
competencia y fiabilidad del laboratorio en la ejecución de los ensayos según los
parámetros establecidos por la norma NTE INEN-ISO 3795. La comparación del
desempeño del LIM-UTA se llevó a cabo siguiendo las directrices establecidas en las
normas utilizadas. Se seleccionaron muestras representativas de materiales textiles
inflamables de acuerdo con la norma NTE INEN-ISO 3795 para su evaluación. Estás
muestras se distribuyeron a diferentes laboratorios participantes, incluido el LIMUTA, con el fin de realizar los ensayos de aptitud de inflamabilidad.
Al culminar el estudio será entregado un informe en el cual se analizaron las
desviaciones, discrepancias y diversos parámetros como la exactitud y la capacidad
del laboratorio para cumplir con los límites del criterio de aceptabilidad requerido por
la norma NTE INEN-ISO/IEC 17043:2010 para el programa de ensayo de aptitud.
Keywords
NORMAS INEN, ENSAYO DE INFLAMABILIDAD, MATERIAL TEXTIL, CÁMARA HORIZONTAL, TIEMPO DE COMBUSTIÓN, VELOCIDAD DE COMBUSTIÓN