Evaluación de la planta de tratamiento de aguas residuales de la comunidad San Juan cantón Tisaleo provincia de Tungurahua
No Thumbnail Available
Date
2024-06
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The Wastewater Treatment Plant of the San Juan community was carried out because it
presented different problems such as structural deterioration in the treatment train,
deficiency in the wastewater purification processes and the presence of vegetation in all
hydraulic units, this due to the lack of proper maintenance on the system.
The evaluation began with the topographic survey and collection of information on the
current state of the WWTP, then the measurement of flows in the influent and effluent
was carried out to obtain the day of greatest demand that served to take composite
samples that were sent to the laboratory. to analyze the most important parameters and
compare them with the regulations, the same ones that demonstrated non-compliance
with ammoniacal nitrogen and phosphate; A diagnosis of all the hydraulic structures was
carried out, resulting in the septic tank and the drying bed meeting their objective,
however there were problems with the distributor box and the trickling filter.
For this reason, improvements were proposed such as the placement of a new screening
grid that complies with the parameters established in CONAGUA, redesign of the
sprinkling system in the biological filter to eliminate the non-contact area of the filter
bed, uniformly distributing the effluent and the construction of a secondary decanter to
recover the biomass generated from the biological filter; finally, an operation and
maintenance manual for the plant's hydraulic units was created with their respective
frequency and reference budget.
Description
La Planta de Tratamiento de Aguas Residuales de la comunidad San Juan se realizó por
presentar diferentes problemáticas como el deterioro estructural en el tren de
tratamiento, deficiencia en los procesos de depuración de agua residual y la presencia de
vegetación en todas las unidades hidráulicas esto debido a la falta de mantenimiento
adecuado en el sistema.
La evaluación inició con el levantamiento topográfico y recolección de información del
estado actual de la PTAR, luego se realizó la medición de caudales en el afluente y
efluente para obtener el día de mayor demanda que sirvió para la toma de muestras
compuestas que fueron enviadas al laboratorio para analizar los parámetros más
importantes y compararlos con la normativa, los mismos que demostraron el
incumplimiento de nitrógeno amoniacal y fosfato; se ejecutó un diagnóstico de todas las
estructuras hidráulicas dando como resultado que la fosa séptica y el lecho de secado
cumplen con su objetivo, sin embargo existieron problemas con la caja distribuidora y el
filtro percolador.
Razón por la cual, se propuso mejoras como la colocación de una nueva rejilla de
cribado que cumpla con los parámetros establecidos en el CONAGUA, rediseño del
sistema de aspersión en el filtro biológico para eliminar el área sin contacto del lecho
filtrante repartiendo uniformemente el efluente y la construcción de un decantador
secundario para recuperar la biomasa generada del filtro biológico, finalmente se realizó
un manual de operación y mantenimiento de las unidades hidráulicas de la planta con su
respectiva frecuencia y presupuesto referencial.
Keywords
PTAR, SISTEMA DE ASPERSIÓN, TULSMA, NITRÓGENO AMONIACAL, FOSFATO, DECANTADOR SECUNDARIO