Ingeniería en Sistemas, Electrónica e Industrial
Permanent URI for this communityhttp://repositorio.uta.edu.ec/handle/123456789/1
Browse
35 results
Search Results
Item Diseño de un programa de prevención de riesgos eléctricos en el laboratorio de transformadores de la Empresa Eléctrica Ambato Regional Centro Norte S.A.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2024-02) Shiguango Nata, Christian Daniel; Ureña Aguirre, Jeanette Del PilarElectric risks are the primary causes of adverse health effects on workers within the occupational field of the electrical sector. The current research project is conducted in the transformer laboratory owned by the Regional Electric Company Centro North S.A., located in the Tungurahua province. The main issue identified is the absence of a culture regarding the significance of electrical safety and the physiological consequences resulting from an electrical accident. The methodology to be employed includes bibliographic research and fieldwork involving visits to the laboratory facilities. To initiate the assessment of electrical risks, the use of a checklist focused on risk analysis is necessary. This checklist is based on the NFPA-70E standards and the verification questionnaire for identifying potential risk factors proposed by the National Institute of Occupational Safety and Health. The purpose is to diagnose the current occupational safety conditions. Furthermore, in the current research, the established guidelines of ISO 31000 are applied concerning the risk assessment process, which in this study focuses on assessing the risk associated with electricity. Meanwhile, to identify hazard sources, the "what if" methodology is applied. Once the processes and respective sources are known, the IPERC methodology is applied to identify hazards and assess associated risks in transformer electrical tests. The conclusion involves the development of a prevention program, which includes safe work procedures for the transformer laboratory personnel. The devised plan proposes a comprehensive safety guide for technical operators in this work area, enabling them to carry out their routine activities reliably. This guide encompasses secure guidelines, preventive actions, and procedures to prevent electrical accidents and promote an electrical safety culture for the involved personnel.Item Diseño de un plan de seguridad industrial en el trabajo para prevenir accidentes y riesgos laborales en la empresa “Kipa Amaranto”(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2023-09) Paguay Gavilanez, Christian Gustavo; Rosero Mantilla, César AníbalThe research project aimed to develop an industrial safety plan to prevent accidents and occupational risks inside the company “Kipa Amaranto”, located in the city of Riobamba, it was a study based on bibliographic research that allows to find documents that are relevant to the research, field research was also used to collect information within the company and qualitative research that allowed to determine the initial situation of the organization. Tools such as SIPOC diagram and flowcharts determined the processes and find the activities within the company, risk inspection formats and the checklist of tools were used which allowed to know how the company is in terms of security the same that does not have a security policy. With the information obtained, the GTC 45 was used to define the risks present in the institution, the individual position was assessed using the RULA method, the incidence of psychosocial risks was reduced by ISTAS 21. Through these methods it was found that the fruit peeling process has a total score of 6 which indicates that research and changes should be made to the job in the short term, psychosocial risks associated with mental load and responsibility were identified. For this reason, an industrial safety plan is designed, which proposes instruments that help reduce the level of ergonomic risk, such as lifting loads, a layout with signage based on executive decree 2393 Art.169 and finally, a training plan was developed for people working within the organization.Item Gestión técnica de seguridad industrial en la Mecánica Industrial DICO-VAL para la prevención de riesgos(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2023-03) García Manobanda, Juan José; Jordán Hidalgo, Edisson PatricioThe industrial mechanics “DICO-VAL", specialized in the recovery of industrial and automotive parts, does not have documentation related to industrial safety such as plans, requirements and technical reports regarding different risk factors that allow the organization to identify, evaluate, control, eliminate and reduce accidents or damages that put the physical integrity of its workers at stake. This is also added to the total ignorance on the part of the operators of the good practices at work, making them execute their tasks in an empirical way completely ignoring the possible dangers that could materialize. For the present project several tools were used in order to find the main problem of the company, among these we have: direct observation, interview to the manager of the mechanics and a list of questions applied to the workers, with all this it is established that the main problem are the mechanical risks Through the research work, the development of industrial safety technical management was proposed as a solution to the problem, following as a guide the Ecuador Model of Industrial Safety Audits which served as the basis for the development of the entire project. It was established that the most critical risks within the production area of mechanics are mechanics with high and notable levels in the processes of welding, lathe machining and milling machine machining. At the same time, there was an absence of: signage, prevention plans, training and documented evidence regarding the surveillance of workers' health.Item Evaluación de factores de riesgo mecánicos para la prevención de accidentes laborales en el taller de prefabricados mecánicos utilizados en facilidades petroleras(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Maestría en Seguridad e Higiene Industrial y Ambiental, 2019) Cáceres Tamayo, José Luis; Rosero Mantilla, César AníbalEXECUTIVE SUMMARY The present research work focuses on the mechanical risk factors in the workshop of mechanical prefabricated of the Central Obrador of the Construcciones y Prestaciones Petroleras (CPP). The methodology used was through the initial observation of the activities by jobs and the application of controlled records in the company and also contrasted with the mechanical risks suggested by the Ministry of Labor Ecuador (MDT). Subsequently, the identified risks are assessed and controlled with the guidance for the identification of the risk factors of the INSHT, this information is developed with the data obtained from the CPP management system, about the events that were reported and recorded in its first year of operations in the study area. The objectives proposed in the development of the research was to perform the annual assessment of mechanical risk factors, apply prevention tools and controls to reduce the level of exposure to the risk factor; to finally show the management carried out in its first year of operations.Item El uso de combustibles y su incidencia en la generación de riesgos de incendio en las actividades de reciclaje y fabricación de acero(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Maestría en Seguridad e Higiene Industrial y Ambiental, 2018) Sánchez Muñoz, Nelson Francisco; Morales Perrazo, Luis AlbertoEXECUTIVE SUMMARY The present research work arises from the need to assess the risk of fire in the work areas where steel recycling and manufacturing is carried out, for which the current management of the use of fuels and its incidence on the risk of fire is investigated. An evaluation is initially carried out taking into consideration the NTP 749 of the INSHT, the total percentage of compliance of the 4 facilities is located in 82.14%, however, the overall rating is very deficient since some applicable items are qualified as very poor . Next, the fire risk assessment is carried out using the Meseri method, where the risk of Steelworks has an assessment of 4.88, while Laminates and Wire Drawing have a value of 4.99, obtaining an important Risk equivalence and therefore a need for reduce the risk immediately. Finally, the fire risk assessment is carried out through the Fire and Explosion Index (F & E) created by Dow Chemical, where it is clear that the risk of Laminates is Intermediate, of Steelworks is Serious and of Wire Drawing is Intense. The proposal to avoid the materialization of a fire and to improve the preventive actions of the company is to elaborate the prevention and action procedures in case of materialization of a fire.Item Evaluación de la contaminación acústica en la planta de producción de la empresa Milplast Cía. Ltda.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial en Procesos de Automatización, 2017) Lalaleo Guangasi, Franklin Darío; Mariño Rivera, Christian JoséEl presente trabajo de investigación tiene como objetivo realizar la evaluación de la contaminación acústica existente en la planta de producción de la empresa Milplast Compañía Limitada que se dedica a la producción y comercialización de suelas para calzado masculino y femenino, dicha contaminación acústica existe en los diferentes puestos de trabajo por el uso de máquinas que poseen actuadores mecánicos, eléctricos, hidráulicos y neumáticos, además que carecen de un mantenimiento eficiente y oportuno. La contaminación acústica existente es causante de molestias en el ambiente de trabajo y en el peor de lo casos es causante de enfermedades profesionales como la hipoacusia laboral. En Milplast se identifican dos secciones productivas que son la jefatura y el área operativa de producción, de tal manera que la investigación abarca a 32 puestos de trabajo en donde se tienen a 49 trabajadores expuestos, se realizó inicialmente la identificación de fuentes de peligro mediante la aplicación de la GTC-45 (guía técnica colombiana), la cual es una guía que permite identificar las condiciones inseguras y a la vez valorar los riesgos originados por ruido estableciendo sus niveles de intervención o actuación. Las mediciones acústicas se realizan utilizando un sonómetro CESVA SC102 y un calibrador acústico EXTECH 407744 y mediante el empleo de estrategias y protocolos de medición “basada en la tarea” y la aplicación de las NTP (notas técnicas de prevención) 270, 950, 951 y 952 emitidas por el INSHT (Instituto nacional de seguridad e higiene en el trabajo), posteriormente se calculan los niveles de presión sonora equivalente y la dosis diaria de ruido en cada puesto de trabajo cuyos resultados se comparan con los límites permisibles establecidos en normativas vigentes, logrando establecer una plan de acción para la prevención de riesgos por exposición a ruido para el personal operativo de la empresa. Los resultados obtenidos indican que el 2,9% de los puestos de trabajo en donde laboran 4 personas se encuentran diariamente expuestos a niveles críticos de ruido que sobrepasan los 93 dB y necesitan de una intervención urgente, el 14,7% de puestos de trabajo se encuentran expuestos a niveles de ruido de entre 80 y 85 dB(A) y el 82,4% de los puestos de trabajo mantienen los niveles de ruido por debajo de los 80dB(A). Además del cálculo de la dosis de ruido diario se tiene como resultado que el 3% de los puestos de trabajo se encuentran sobreexpuestos a contaminación acústica siendo necesaria su intervención para mejorar las condiciones de trabajo. De los resultados obtenidos se deduce la necesidad de poner en marcha un plan de acción pare el control de riesgos por ruido, el mismo que contempla la ejecución de medidas técnicas, principalmente la inspección y mantenimiento preventivo de la maquinaria, la utilización obligatoria de orejeras y tapones auditivos en los puestos en donde se supera los límites permisibles de exposición a ruido y también medidas organizativas como la rotación de puestos, pausas sin ruido, colocación de señalética, formación y capacitación y la vigilancia de la salud de los trabajadores.Item Riesgo Mecánico y su incidencia en la salud de los trabajadores del Área de Talleres del Gobierno Autónomo Descentralizado Provincial de Pastaza(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Maestría en Seguridad e Higiene Industrial y Ambiental, 2017) Mazorra Olmedo, Fernando Xavier; Rosero Mantilla, César AníbalEn la provincia de Pastaza debido al alto crecimiento organizacional e industrial ha sido necesario estructurar reglamentos, protocolos y planes de Seguridad y Salud Ocupacional debido a los frecuentes accidentes laborales encontrados, así se toma como referencia al Gobierno Autónomo Descentralizado Provincial de Pastaza (GADPPz) que adoptado normas de mejoramiento continuo con el marco legal asignando recursos para el desarrollo apropiado de la misma con políticas de Seguridad y Salud Ocupacional, razón por la cual es necesario que los trabajadores del área de talleres sea consciente de los riesgos que conlleva de la actividad que realizan en dicha área. En el área de talleres del GADPPz se han encontrado accidentes laborales debido a que los trabajadores no utilizan adecuadamente sus herramientas de trabajo y equipos de protección personal, existiendo un alto riesgo de accidentes en la manipulación de la maquinaria y por ende los obreros tienen riesgos físicos como: quemaduras, cortes, daños visuales, problemas auditivos, respiratorios; entonces se observa la importancia de la seguridad ocupacional dentro de la misma.Item Riesgos Químicos y su incidencia en la Salud de los Trabajadores en el Área de Ingeniería de Calzado de la Empresa PLASTICAUCHO INDUSTRIAL S.A.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Dirección de Posgrado. Maestría en Seguridad e Higiene Industrial y Ambiental, 2016) García Álvarez, Marco Vinicio; Rosero Mantilla, César AníbalEXECUTIVE SUMMARY The development of the present project refers to the global, national and local problems, with scientific studies that have been guaranteed by the international institutions that infer in the analysis of the chemical products; It also presents the academic chapters that are established for the research process about chemical risks and their affectation to workers' health. The document shows research on chemical risk and methods that are developed for industrial hygiene; The approach is given by the analysis of the problem, including the different causes and consequences that are presented in the area of Footwear Engineering; It also points out the guidelines that connect the theoretical study and its implementation when practicing it and leading in the implementation of safety and health mechanisms in the industrial field. The survey and the interview applied help in order to expand the qualitative results of the hypothesis. The methods applied in the area of Footwear Engineering of the company Plasticaucho Industrial, are used to identify risks and the evaluate the level of chemical risk in which workers are exposed; The quantitative results point out the level of doses and the magnitude of the concentrations in the environment of the place of work, leading in the proposal of the appropriate controls and improvement of the environment; The methodological sequence of industrial hygiene is also applied for the preventive measures in the workers´ health, the analysis is presented with the affections that are supposed to be a cause of the chemical contaminants by the vapors of glues and solvents that are the Toluene and Ketone.Item Honeypot como herramienta de prevención y detección de Ciberataques en las redes de datos de la Facultad de ingeniería en Sistemas, Electrónica e Industrial(2015-07) Vargas Paredes, Javier Santiago; Morales Lozada, José VicenteEl presente proyecto analiza las posibles vulnerabilidades e inseguridades presentes en las redes de datos y sistemas informáticos de la Facultad de Ingeniería en Sistemas, Electrónica e Industrial, FISEI, implementando una tecnología conocida como Honeypot, herramienta que simula servicios y aplicaciones vulnerables en una red trampa llamada Honeynet, a este tipo de tecnologías se las conoce como Sistemas de Detección de Intrusos (IDS), utilizados para monitorear los eventos que ocurren en un sistema informático en busca de intentos de intrusión en la red de datos; todo el tráfico en la red analizado, nos permite evaluar e incrementar reglas de seguridad informática entre los usuarios internos y externos de la red de datos. Además en este trabajo se han analizado los resultados del Honeypot como actividades de un hacker o atacante accediendo a la red, a partir de estas alertas el administrador del sistema puede tomar medidas preventivas.Item Las condiciones de seguridad e higiene industrial y su incidencia en la exposición al ruido del personal que labora en la casa de máquinas de la Central Hidroeléctrica Marcel Laniado de Wind del Embalse Daule Peripa(Universidad Técnica de Ambato. Dirección de Posgrado. Facultad de Ingeniería en Sistemas, Electrónica e Industrial, 2015) Mera Ramos, Sixto Andrés; Reyes Vásquez, John PaúlThis titulation work raises a study of security and industrial hygiene conditions to existing technical and administrative level, the powerhouse of the hydroelectric power station Marcel Laniado de Wind del embalse Daule Peripa. This study builds on the results of the measures sonometrías noise levels 11, 20 and 26 of the powerhouse; the noise dosimetry made to panel builders in the three work shifts of eight hours each, because it considers this position as the largest exposure to levels above 85 dBA; and analysis of audiometric evaluations conducted by staff of the company in the years 2010 and 2012 whose earnings reports warn the existence of workers with diseases related to exposure to noise. To solve this problem, it is proposed to develop a method of preserving hearing and a protocol for medical surveillance, to monitor the level of disease as a result of this risk factor in the staff working in the powerhouse.