Mejoramiento del sistema de distribución de agua potable de la cabecera parroquial de san francisco del cantón Tisaleo provincia de Tungurahua
No Thumbnail Available
Date
2024-08
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
Currently, the distribution system in San Francisco parish does not provide quality service
even though it is practically new. On the other hand, the distribution system does not completely
cover the parish, causing the inhabitants to look for other sources of supply. The present project
has been carried out to improve and expand the system.
Initially, the study area was delimited by means of the canton's cadastre, then a topographic
survey was carried out with the help of an RTK. With the georeferenced plans of the existing
potable water system, the system was evaluated and it was found that the storage tank of the study
parish had a conduction network that fed the tank of the San Luis parish, so this parish was also
analyzed. An evaluation was made both physically and hydraulically where deficiencies were
found.
Then, the existing system was modeled for scenarios in static and dynamic state, resulting
that the two parishes presented problems of velocities and pressures. In the proposal to improve
the existing system and expand it, two pressure regulating valves were installed in San Francisco
parish and three pressure regulating valves were installed in San Luis three pressure regulating
valves were installed, which optimized the pressures to 100 percent. The velocities in the two
sectors were not optimized to 100 percent, so it was suggested that bleed valves be installed.
Finally, a budget and schedule were prepared.
Description
Actualmente, el sistema de distribución de la parroquia San Francisco no brinda un servicio
de calidad a pesar de que puede considerarse prácticamente nuevo. Por otra parte, el sistema de
distribución no cubre por completo a la parroquia generando que los habitantes busquen otras
fuentes de abastecimiento. Se ha llevado a cabo el presente proyecto para su mejoramiento y
ampliación.
Inicialmente se delimitó el área de estudio por medio del catastro del cantón, posteriormente
se realizó el levantamiento topográfico con ayuda de un RTK. Con los planos georreferenciados
del sistema de agua potable existente se evaluó el sistema y se encontró que el tanque de
almacenamiento de la parroquia de estudio contaba con una red de conducción que alimentaba al
tanque de la parroquia San Luis por lo que esta parroquia también fue analizada. Se hizo una
evaluación tanto de forma física como hidráulica en donde se encontraron deficiencias.
A continuación, se modeló el sistema existente para escenarios en estado estático y
dinámico resultando que las dos parroquias presentaban problemas de velocidades y presiones. En
la propuesta de mejora del sistema actual y la ampliación de este para la parroquia San Francisco
se colocaron dos válvulas reguladoras de presión y en San Luis se colocaron tres válvulas
reguladoras de presión con lo cual se optimizaron las presiones al 100 por ciento. Las velocidades
en los dos sectores no se optimizaron al 100 por ciento por lo que se sugirió la colocación de
válvulas de purga. Finalmente se realizó el presupuesto y el cronograma.
Keywords
TOPOGRAFÍA, SISTEMA DE DISTRIBUCIÓN, AGUA POTABLE, PRESIÓN DE AGUA, VELOCIDAD DEL SISTEMA, PRECIOS UNITARIOS